Description: Description: Description: Description: Description: Description: Description: Description: Description: C:\Users\kghavam\Desktop\Main\Triangle.jpg

Contact Information
Description: Description: Description: Description: Description: Description: Description: Description: Description: C:\Users\kghavam\Desktop\Main\Line.gif

Kamyar Ghavam

Lecturer
Mechanical & Mechatronics Engineering Department

University of Waterloo
200 University Avenue West
Waterloo, ON Canada, N2L 3G1

Office: E7-3408
Phone: (519) 888-4567 x40175

E-mail:
kamyar.ghavam@uwaterloo.ca

Description: Description: Description: Description: Description: Description: Description: Description: Description: C:\Users\kghavam\Desktop\Main\Kamyar.jpg

Description: Description: Description: Description: Description: Description: Description: Description: Description: C:\Users\kghavam\Desktop\Main\Triangle.jpg

Research Fields & Education
Description: Description: Description: Description: Description: Description: Description: Description: Description: C:\Users\kghavam\Desktop\Main\Line.gif

 


Postdoctoral Research Fellow
, Civil & Environmental Engineering Department, 2012-2014

 
Molecular Dynamics & Dislocation Theory

Postdoctoral Research Fellow, Mechanical & Mechatronics Engineering Department, 2009-2012
 
Non-isothermal hot forming of aluminum alloys
 
Hot die stamping of ultra-high strength steels

Ph.D., Mechanical Engineering, 2006
  Corotational Modeling of Large Deformation Elastic-Plastic Materials with Induced Anisotropy
      

Description: Description: Description: Description: Description: Description: Z:\public_html\Main\Triangle.jpg

Recent Journal & Conference Papers
Description: Description: Description: Description: Description: Description: Z:\public_html\Main\Line.gif

  • Ghavam K., Bagheriasl R., Worswick M.J., Stress analysis of non-isothermal deep drawing with induced anisotropy and rate sensitivity at elevated temperatures, ASME J  Manufacturing Science and Engineering, DOI: 10.1115/1.4025407, 2013.

  • Bagherial R., Ghavam K., Worswick M.J., Formability improvement with independent die and punch temperature control, Int J. Mater Form., DOI 10.1007/s12289-012-1115-6, 2012.

  • Bagheriasl R., Ghavam K., Worswick M.J., Effect of strain rate and temperature gradient on warm formability of Aluminum alloy sheet, NUMISHEET 2011, Seoul, Korea, August 2011.

  • Ghavam K. and Naghdabadi R., Constitutive modeling of temperature and strain rate dependent elastoplastic hardening materials using a corotational rate associated with the plastic deformation, Int. J. Plasticity, 27 (9), pp 1445-1455, 2011.

  • Bardelcik A., Ghavam K., George R., Worswick M.J., An Impact Model of a Hot Stamped Lab-Scale B-Pillar with Tailored Properties, International Conference on Hot Sheet Metal Forming of High-Performance SteelKassel, Germany, June 2011. 

  • Bagheriasl R., Ghavam K., Worswick M., Stress analysis of a deep drawn cup with plastic anisotropy and rate sensitivity at elevated temperatures, IDDRG, Bilbao, Spain, June 2011.

  • Bagheriasl R., Ghavam K., Worswick M.J., Formability analysis of aluminum alloy sheets at elevated temperatures with numerical simulation based on the M-K method, ESAFORM, Belfast, Ireland, April 2011.

  • Ghavam K., Bagheriasl R., Worswick M.J., Numerical modeling of hemispherical dome testing of aluminum alloy sheet at elevated temperatures, International Symposium of Plasticity, Puerto Vallarta, Mexico, Jan 2011.

  • Bagheriasl R., Ghavam K., Worswick M.J., Formability improvement with independent die and punch temperature control, IDDRG Conference, Graz, Austria, June 2010.