Dr. Srihari Kurukuri

Research Associate


Forming and Impact Mechanics Research / University of Waterloo
Department of Mechanical and Mechatronics Engineering


Contact:

Research activities:

Current projects:

Previous projects:

Publications:

  1. Srihari Kurukuri, Michael J. Worswick, Dariush Ghaffari Tari, Raja K. Mishra and Jon T. Carter, "Rate sensitivity and tension-compression asymmetry in AZ31B magnesium alloy sheet.", Philosophical Transactions of the Royal Society A, 372: 20130216, 2014. [DOI].

  2. Srihari Kurukuri, Michael J. Worswick, Alexander Bardelcik, Raja K. Mishra and Jon T. Carter, "Constitutive behavior of commercial grade ZEK100 magnesium alloy sheet over a wide range of strain rates", Metallurgical and Materials Transactions A, Volume 45 (8), Pages 3321-3337, 2014. [DOI].

  3. R. Bagheriasl, D.Ghaffari Tari, S. Kurukuri and M.J. Worswick, "1.12 - Material Properties for Numerical Calculations", Book Chapter In Comprehensive Materials Processing, edited by Saleem Hashmi, Gilmar Ferreira Batalha, Chester J. Van Tyne and Bekir Yilbas, Elsevier, Pages 227-246, 2014. [DOI].

  4. Srihari Kurukuri and Michael Worswick, "Modeling of strength differential effects in hcp sheet materials", ASME 2014 International Manufacturing Science and Engineering Conference - MSEC2014, June 9-13, 2014, Detroit, Michigan, USA (June 2014). [link].

  5. C. Butcher, S. Kurukuri, M. Boba, N. Panahi, M. Worswick and T. Skszek, "Characterization of ZEK100 in tensile stress states for warm forming applications", 7th Forming Technology Forum - Warm and Hot Forming, September 2014, University of Twente, Enschede, The Netherlands . [link].

  6. Rohit Verma, Srihari Kurukuri, Michael Worswick and Sooky Winkler, "Effect of warm forming on springback of aluminum alloy sheet.", IDDRG 2014, Paris, France (June 2014). [link].

  7. Srihari Kurukuri, Michael J. Worswick, Raja K. Mishra and Jon T. Carter, "Material characterization and constitutive modelling of ZEK100 Mg alloy sheet over a range of strain rate and temperatures.", 9th International Conference on Mechanics of Time-Dependent Materials, Montreal, QC, Canada (May 2014). [link].

  8. Srihari Kurukuri, Michael Worswick, Raja Mishra and Jon Carter, "Effect of Temperature and Strain Rate on Mechanical Response of ZEK100 Mg Alloy Sheet.", TMS 2014 143rd Annual Meeting & Exhibition, San Diego, CA, USA. [link].

  9. Srihari Kurukuri and Michael J. Worswick, "An alternative approach for modeling strength differential effect in sheet metals with symmetric yield functions.", NUMISHEET 2014 - AIP Conference Proceedings 1567, 544 (2013). [link].

  10. Michael J. Worswick, Srihari Kurukuri, Dariush Ghaffari Tari, Jon T. Carter and Raja K. Mishra,"Material characterization and modeling of AZ31B and ZEK100 magnesium alloy sheets.", NUMISHEET 2014 . [link].

  11. Srihari Kurukuri, Michael J. Worswick, Raja K. Mishra and Jon T. Carter,"Influence of initial texture on mechanical response of AZ31B and ZEK100 Mg sheets.", Material Science and Technology 2013, Montreal, QC, Canada. [link].

  12. Michael J. Worswick, Srihari Kurukuri, Dariush Ghaffari Tari, Jon T. Carter and Raja K. Mishra,"Material characterization and modeling of commercial AZ31B and rare-earth ZEK100 magnesium alloy rolled sheets.", TMS Magnesium Workshop Madrid 2013. [link].

  13. A. Miroux, M. Ghosh, S. Kurukuri, R.K. Dutta, M. de Jong, A. Bahrami, L.A.I Kestens, A.H. van den Boogaard, P.E.J. Rivera-Diaz-Del-Castillo, M.H.F. Sluiter and A.J. den Bakker,"Application of combined model approaches to the simulation of microstructure evolution during processing of aluminium alloys.", TMS 2013 142nd Annual Meeting & Exhibition, San Antonio, Texas, USA. [link].

  14. Srihari Kurukuri, Reza Bagheriasl and Michael J. Worswick, "A study of localized necking in thermally assisted sheet metal forming", IDDRG 2012, Mumbai, India. [link].

  15. S. Kurukuri, A. Bardelcik, M.J. Worswick, R.K. Mishra and J.T. Carter, "High strain rate characterization of ZEK100 magnesium rolled alloy sheet", EPJ Web of Conferences, 26, pp. 01042, 2012. [DOI].

  16. Srihari Kurukuri, Dariush Ghaffari Tari, Michael J. Worswick, Raja K. Mishra and Jon T. Carter, "Dynamic characterization of AZ31B and ZEK100 magnesium alloy sheets", TInternational Conference on Magnesium Alloys and Their Applications . [link].

  17. Srihari Kurukuri, "Simulation of thermally assisted forming of aluminium sheet",University of Twente, Enschede, The Netherlands, ISBN 978-90-77172-56-8, [P.hD. Thesis].

  18. S. Kurukuri, A. Miroux, H.H. Wisselink and A.H. van den Boogaard, "Simulation of stretch forming with intermediate heat treatments of aircraft skins - a physically based modeling approach", Int. J. Mat. Forming, 4(2), pp. 129-140, 2011. [DOI].

  19. S. Kurukuri, A.H. van den Boogaard, A. Miroux and B. Holmedal, "Warm forming simulation of Al-Mg sheet", J. Mat. Process. Tech, 209(15-16), 5636 - 5645, 2009. [DOI].

  20. S. Kurukuri, A. Miroux and A.H. van den Boogaard, "Effect of temperature on anisotropy in forming simulations of aluminum alloys", Int. J. Mat. Forming, 2, 387-390, 2009. [DOI].

  21. A.H. van den Boogaard, S. Kurukuri, M. Ghosh and A. Miroux, "Thermo-mechanical forming of Al-Mg-Si Sheet", Comp. Method. Mat. sci., 9(1), 5-11, 2009. [DOI], [UT Repository].

  22. S. Kurukuri, A.H. van den Boogaard, M. Ghosh and A. Miroux, "Thermo-mechanical Forming of Al-Mg-Si Alloys: Modeling and Experiments", AIP Conf. Proc. 1252, 810, 2010. [DOI], [UT Repository].

  23. H. Berger, S. Kurukuri, S. Kari U. Gabbert, R. Rodriguez-Ramos, J. Bravo-Castillero and R. Guinovart-Diaz, "Numerical and analytical approaches for calculating the effective thermo-mechanical properties of three-phase composites", J. Therm. Stress., 30(8), 801-817, 2007. [DOI].

  24. S. Kurukuri, M. Ghosh, A. Miroux and A.H. van den Boogaard, "An advanced material model for aluminum sheet forming at elevated temperatures", Computational Plasticity X - Fundamentals and Applications, CIMNE, Barcelona, Spain, 2009. [UT Repository].

  25. S. Kurukuri, M. Ghosh, A. Miroux and A.H. van den Boogaard, "A Dislocation based constitutive model for warm forming of aluminum sheet", International Conference on Technology of Plasticity (ICTP), Vol. TB1-3, Gyeongju, Korea, 2008. [UT Repository].

  26. S. Kurukuri, A.H. van den Boogaard and J. Huetink, "Finite element simulation of aluminum sheet forming using Alflow hardening model", Computational Plasticity IX - Fundamentals and Applications, CIMNE, Barcelona, Spain, 2007. [UT Repository].

  27. A. Miroux, M. Ghosh, S. Kurukuri, L. Kestens and A.H. van den Boogaard, "Mechanical and forming properties of AA 6xxx sheet from room to warm temperatures", 12th International Conference on Aluminum Alloys, Yokohama, Japan, 2010. [UT Repository].

  28. H. Berger, S. Kurukuri,S. Kari, U. Gabbert and R. Rodriguez-Ramos "Numerical and analytical approaches for calculating the effective thermo-mechanical properties of three-phase composites", 7th International Congress on Thermal Stresses, Taipei, Taiwan, 2007. [pdf].

Free counter and web stats